SCSI vSwitch configuration question. Crrently all hosts are 4.0 U2 and connect to NetApp. We are adding a EMC VNX SAN. Each host will have access to both NetApp and EMC. On the EMC SAN there are two SP (storage processors) each with 2 paths. The IP for these are 10.15.25.150, 151, 152 and .153. Is it possible to configure the vSwitch for iSCSI so that it passes traffic to all 4 IPs. We realize it may not be perfectly load balanced, but the way we have it configured now each vSwitch has only 2 vmnics (both active). Storage path properties show these as Active and Active (IO). All four possible paths to the VNX are not being utilized. Thanks.
↧