Apologies, I mis-read the comment.
You have to enter the diag mode to run this command
# priv set diag
Warning: These diagnostic commands are for use by NetApp
personnel only.
Lab*> stats show vstorage
vstorage:vfiler0:instance_name:vfiler0
vstorage:vfiler0:node_name:
vstorage:vfiler0:instance_uuid:
vstorage:vfiler0:xcopy_copy_reqs:0
vstorage:vfiler0:xcopy_abort_reqs:0
vstorage:vfiler0:xcopy_status_reqs:0
vstorage:vfiler0:xcopy_total_data:0
vstorage:vfiler0:xcopy_invalid_parms:0
vstorage:vfiler0:xcopy_authorization_failures:0
vstorage:vfiler0:xcopy_authentication_failures:0
vstorage:vfiler0:xcopy_copy_failures:0
vstorage:vfiler0:xcopy_copyErr_isDir:0
vstorage:vfiler0:xcopy_copyErr_data_unrecov:0
vstorage:vfiler0:xcopy_copyErr_offline:0
vstorage:vfiler0:xcopy_copyErr_staleFH:0
vstorage:vfiler0:xcopy_copyErr_IO:0
vstorage:vfiler0:xcopy_copyErr_noSpace:0
vstorage:vfiler0:xcopy_copyErr_diskQuota:0
vstorage:vfiler0:xcopy_copyErr_readOnly:0
vstorage:vfiler0:xcopy_copyErr_other:0
vstorage:vfiler0:xcopy_intravol_moves:0
vstorage:vfiler0:xcopy_intervol_moves:0
vstorage:vfiler0:xcopy_one2one_moves:0
vstorage:vfiler0:xcopy_one2many_moves:0
vstorage:vfiler0:writesame_reqs:0
vstorage:vfiler0:writesame_holepunch_reqs:0
vstorage:vfiler0:writesame_total_data:0
vstorage:vfiler0:vaw_reqs:2221
vstorage:vfiler0:vaw_miscompares:0
-f10
http://highoncloud.blogspot.in/
About VMware Virtualization on NetApp