Have to manually load module every time once server has rebooted with vmkload_mod bfa
Module is showing as enabled on boot:
~ # esxcfg-module -g bfa
bfa enabled = 1 options = ''
~ # esxcli system module list
Name Is Loaded Is Enabled
----------------------------- --------- ----------
bfa true true
~ # cat /proc/scsi/bfa/4
Chip Revision: Rev-C
Manufacturer: Brocade
Model Description: Brocade-1020
Instance Num: 0
Serial Num: AXU0440F01B
Firmware Version: 3.2.4.0
Hardware Version: Rev-C
Bios Version: 2.3.0.3
Optrom Version: 2.3.0.3
Port Count: 2
WWNN: 20:00:00:05:33:26:b8:92
WWPN: 10:00:00:05:33:26:b8:92
Instance num: 0
Target ID: 0 WWPN: 50:06:01:6e:3e:a0:1c:8c
Target ID: 1 WWPN: 50:06:01:67:3e:a0:1c:8c