Hello,
I am trying to set-up my ESXi Lab, and after I set-up my HBA and connects to it via the 192 Network. The iSCSI shows up as "not used":http://i.imgur.com/5vVZtWc.png
I have the following environment:
OpenFiler iSCSI SAN management 192.168.1.113 & 10.4.4.113 as the share: http://i.imgur.com/7CLkqpb.png
My ESXi Host has 2 dedicated NICS (VMNIC2-3) for the 10.0.0.0 /24 network and I made kernel ports for them (vmk1-2) with the IP of .101 & .111
After a ping from the kernel port 1 (10 Network) they cannot communicate with each other (vmkping or ping same results) : http://i.imgur.com/sFKWD64.png
I am using Workstation 11 and my 10 Network is set in my VNE as shown here (tried checking the box that says connect a local virtual adapter to this network and rebooting vms) : http://i.imgur.com/uJCE7GJ.png
In the VM settings of my host & OpenFiler I have those NICS (2-3 on host and VMNIC1 in OpenFiler) set to VMNET1
In vSphere I have the 2 VM kernel ports set for the 10 network for storage .101 & .111 on my Distributed Switch I have it linked to my VMNIC2: http://i.imgur.com/XRLw1tl.png
Anyone have an idea why I can't have them talk on the 10 Network?
Thanks
