Clik here to view.
Re: vob.iscsi.connection.stopped
Best thing to start with is to check the stability and performance of the storage in the first host , you are having an hdd failure . i suggest that u check them up first . hope that helped . Best...
View ArticleClik here to view.
Re: vSphere 5.1 and Netapp VSC questions
If the MPIO settings show alert you will need to let NetApp adjust the settings. Right click on the host and click on Set Recommended Values. Only the MPIO settings are necessary, but I leave all the...
View ArticleClik here to view.
Re: Facing performance issues with ESXi
sounds to me it is still a compatibility problem even tho they said its compatible as when you install it on main site it does the problem and on Dr its not then the device is completely ok but the...
View ArticleClik here to view.
Re: iscsi boot lun size
Installing ESXi 5.1 requires a boot device that is a minimum of 1GB in size. When booting from a local disk or SAN/iSCSI LUN, a 5.2GB disk is required to allow for the creation of the VMFS volume and a...
View ArticleClik here to view.
Re: How can I changed the default provision policy from thick to thin when...
Sure . here is an article with a step by step of how to change provision policy from thick to thin ....
View ArticleClik here to view.
Re: How to change vCenter/VASA alarm triggers treshold "Thin-provisioned...
Some alarms contain triggers that are not supported in the vSphere Client and cannot be changed. However, you can still configure the alarm actions, enable or disable the alarm, and change the alarm...
View ArticleClik here to view.
Re: MD1000 Firmware Update over ESXi 4.1
Im not really sure where you failed i wish you can explain more , but here is a KB that might help you out VMware KB: VMware ESXi 4.1, Patch ESXi410-201101201-SG: Updates ESXi 4.1 Firmware And drivers...
View ArticleRe: QNAP or FreeNAS?
I don't see it as a question - you can spend your entire life self-managing custom solutions to operate cheap hardware. The likely outcome is you will run into some issue and no one will help you, and...
View ArticleRe: P2000 G3 FC Disk Latency ESXi 5.5
Hi GovM Just curious of you ever got this resolved? I'm seeing a similar issue and suspecting HBA issue.
View ArticleFile system block size
Hello, I'm looking for a way to edit file system block size. I want to setup block size for those elements : //boot/homeswap/tmp/var/var/core/var/log I'm using ESXi 5.0 U3. Thank you.
View ArticleRe: File system block size
With the release of vSphere 5.0, VMFS (VMFS-5) block size has been fixed at 1 MB. It's not settable at the user level, as far as I know, like vSphere 4.x. Forgot the link: VMware KB: Frequently Asked...
View Articlelost virtual machine
hi,this is not q question properly, its a situation, tha i have in the past, and i want to know if i was the only one,once upon a time, i try to clone a running virtual machine, that fails in some...
View ArticleRe: lost virtual machine
Hi, This happens when the clone or backup job fails and the snapshots are not automatically deleted. In this scenario the snapshots that were created during a clone or backup job remains with the VM....
View ArticleRe: lost virtual machine
It might have been a one time user error - The two command Remove From Inventory and Delete from Disk are right next to each other - Remove From Inventory removes the VM form the vCenter inventory...
View ArticleRecompute Datastore Groups Locked
Hello! I have this inprogress-thread locked in my vCenter: Recompute Datastore Groups<MYDATACENTER.MYDOMAIN.COM.BR>In Progresscom.vmware.vcDr<MYDATACENTER.MYDOMAIN.COM.BR>05/02/2014...
View ArticleRe: lost virtual machine
thanks for the aclaration, im pretty sure i just remove from inventory, no delete, it just q rare situation, things that happend to me in some pint and i always think , that just happend to me, for...
View ArticleRe: lost virtual machine
im reading your comemnt carefully, maybe this is the reasonthank you very much
View ArticleRe: QNAP or FreeNAS?
If you’re on paid ESX(i) version, then, you can use VeeamZIP functionality included in free version of VB&R. In many ways, VeeamZIP acts as a simple zip utility. All you need to do is to select...
View ArticleRe: vFlash performance metrics missing
Me too - I've just upgraded from a fresh installation of vCenter Server 5.1 on Oracle DB, to 5.5b and the counters are missing. I have enabled vFRC on one ESXi 5.5 host (Ent Plus license) and I can use...
View ArticleRe: How does multipathing work?
Another reason to create an array that is active / passive is to ensure that no performance is lost when a controller goes through maintenance or fails. Many customers like to run both controllers in...
View Article